3-6 A-61408 September 1995
F17 Transport System Operation Time
Allows you to display elapsed time of operation of the transport
system.
NOTE: This elapsed time is recorded in the scanner’s software
and will be reset if a ROM replacement is performed.
Therefore, this software time display can vary from the
elapsed time indicated in the transport system operation
meter located inside the side access door.
F19 Display Language
Allows you to choose your preferred language. Enter 1 for Japa-
nese, 0 for English.
F20 Measurement System
Allows you to choose the measurement system to be used. Enter
1 for inches, 0 for millimeters.
F21 Set Time
Allows you to set the time on the Status Display. The format is
HH:MM. HH equals the hour using the 24-hour clock. MM equals
the minutes, valid entries are from 00 to 59.
NOTE: The HH:MM format is the default setting. However, one of
various display formats can be selected at installation or
upon request.
F22 Set Date
Allows you to set the date on the Status Display. The format is
YYYY/MM/DD. YYYY equals the four-digit year. MM equals the
month; valid entries are from 01 to 12. DD equals the day; valid
entries are from 01 to 31.
NOTE: The YYYY/MM/DD format is the default setting. However,
one of various display formats can be selected at installa-
tion or upon request.
F23 Display Date ant Time
Allows you to view the time and date in the Status Display in the
selected display formats.