If you are replacing an old memory module, open the retaining clips and remove the memory module being replaced as shown.
Figure 45. Removing the old memory module
6.Position the memory module over the memory slot. Make sure that the notch 1 on the memory module aligns correctly with the slot key 2 on the system board. Push the memory module straight down into the slot until the retaining clips close.
Figure 46. Installing the memory module
What to do next:
vTo work with another option, go to the appropriate section.
vTo complete the installation, go to “Completing the FRU replacement” on page 155.
Chapter 9. Replacing FRUs - 607 computers 131
