Lenovo 7749, 7721, 7715 XXX If a component is called out, make sure, 086-199-XXX, XXX No action

Diagnostic Error Code	FRU/Action
086-197-XXX	1.	Make sure the component that is called
Mouse Port interface test warning
		out is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2.	Re-run test
	3.	Replace the component that is called out
		in warning statement
	4.	Replace the component under test
086-198-XXX	1.	If a component is called out, make sure
Mouse Port interface test aborted
		it is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2.	Flash the system and re-test. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3.	Go to “Undetermined problems” on page
		80
086-199-XXX	1.	See “Undetermined problems” on page
Mouse Port interface test failed, cause
		80
unknown
	2.	Flash the system and re-test. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3.	Replace component under function test
089-000-XXX	No action
Microprocessor Test Passed
089-XXX-XXX	1.	Microprocessor(s)
Microprocessor failure
	2.	System board
089-195-XXX	Information only
Microprocessor Test aborted by user	Re-start the test, if necessary
089-196-XXX	1.	Press F3 to review the log file
Microprocessor test halt, error threshold
	2.	Re-start the test to reset the log file
exceeded
089-197-XXX	1.	Make sure the component that is called
Microprocessor test warning
		out is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2.	Re-run test
	3.	Replace the component that is called out
		in warning statement
	4.	Replace the component under test
089-198-XXX	1.	Flash the system. See “Updating
Microprocessor test aborted
		(flashing) the BIOS from a disc” on
		page 380
	2.	Go to “Undetermined problems” on page
		80

Chapter 7. Symptom-to-FRU index 71