![](/images/new-backgrounds/1102819/102819251x1.webp)
10.Go to “Completing the FRU replacement.”
Completing the FRU replacement
After replacing the FRUs, you need to reinstall any removed parts, reconnect and route any internal cables, reinstall the computer cover, and reconnect any external cables, including telephone lines and power cords. Depending on the FRUs replaced, you might need to confirm the updated information in the Setup Utility program, see Chapter 6, “Using the Setup Utility,” on page 49.
Note: When the power cord is first plugged in, the computer might appear to turn on for a few seconds and then turn off. This is a normal sequence to enable the computer to initialize.
To reinstall the computer cover and reconnect cables to your computer:
1.Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. See “Locating components” on page 88 for the location of the various components.
2.Reconnect any internal cables.