3.Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover engage the rails. Then, push the computer cover closed until it snaps into position.

Figure 37. Reinstalling the computer cover

4.If the computer cover is secured with thumbscrews, install them.

5.If a cover lock is installed, lock the cover.

6.Reconnect the external cables and power cords to the computer. See “Locating connectors on the rear of your computer” on page 85.

7.If you have replaced the system board, you must update (flash) the BIOS. See “Updating (flashing) the BIOS from a disc” on page 380.

8.Some FRU replacements require the configuration to be updated. To update your configuration, see Chapter 6, “Using the Setup Utility,” on page 49.

Chapter 8. Replacing FRUs - Tamdhu computers 121

Page 127
Image 127
Lenovo 7715, 7721, 7774, 7706, 7719, 7749, 7799, 7773, 7705, 7717, 7718, 7522, 7515, 7569, 7523, 7611 Reinstalling the computer cover