4.Install the adapter card into the appropriate slot on the system board, see “Locating parts on the system board” on page 89. If you are replacing an adapter card, remove the old adapter card that is currently installed before installing the new one.
Notes:
a.The adapter card fits tightly into the card slot. If necessary, alternate moving each side of the adapter card a small amount until it is removed from the adapter card slot.
b.If the adapter card is held in place by a retaining latch, press the adapter card retaining latch 1 downwards to disengage the latch. Grasp the adapter card and then gently pull the adapter card out of the slot.
