Lenovo 7515, 7721 005-199-XXX, 005-2XX-XXX Video card, if installed 005-3XX-XXX, XXX No action

Diagnostic Error Code	FRU/Action
005-198-XXX	1.	If a component is called out, make sure
Video test aborted
		it is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2.	Flash the system and re-test. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3.	Go to “Undetermined problems” on page
		80
005-199-XXX	1.	Go to “Undetermined problems” on page
Video test failed, cause unknown
		80
	2.	Flash the system and re-test. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3.	Replace component under function test
005-2XX-XXX	1.	Video card, if installed
005-3XX-XXX
	2.	System board
Video subsystem error
006-000-XXX	No action
Diskette interface Test Passed
006-0XX-XXX	1.	Diskette drive Cable
Diskette interface error
	2.	Diskette drive
	3.	System board
006-195-XXX	Information only
Diskette interface Test aborted by user	Re-start the test, if necessary
006-196-XXX	1.	Press F3 to review the log file
Diskette interface test halt, error threshold
	2.	Re-start the test to reset the log file
exceeded
006-197-XXX	1.	If a component is called out, make sure
Diskette interface test warning
		it is connected and/or enabled
	2.	Re-run test
	3.	Replace the component that is called out
		in warning statement
	4.	Replace the component under test
006-198-XXX	1.	If a component is called out, make sure
Diskette interface test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3.	Go to “Undetermined problems” on page
		80
006-199-XXX	1.	Go to “Undetermined problems” on page
Diskette interface test failed, cause unknown
		80
	2.	Flash the system and re-test
	3.	Replace component under function test
006-25X-XXX	1.	Diskette drive cable
Diskette interface Error
	2.	Diskette drive
	3.	System board

60Hardware Maintenance Manual