Lenovo 7560, 7721, 7715 018-199-XXX, XXX No action, 020-0XX-XXX PCI card, XXX Information only

Diagnostic Error Code	FRU/Action
018-198-XXX	1.	If a component is called out, make sure
PCI Card test aborted
		it is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2.	Flash the system and re-test. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3.	Go to “Undetermined problems” on page
		80
018-199-XXX	1.	Go to “Undetermined problems” on page
PCI Card test failed, cause unknown
		80
	2.	Flash the system and re-test. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3.	Replace component under function test
018-250-XXX	1.	PCI card
PCI Card Services error
	2.	Riser card, if installed
	3.	System board
020-000-XXX	No action
PCI Interface Test Passed
020-0XX-XXX	1.	PCI card
PCI Interface error
	2.	Riser card, if installed
	3.	System board
020-195-XXX	Information only
PCI Test aborted by user	Re-start the test, if necessary
020-196-XXX	1.	Press F3 to review the log file
PCI test halt, error threshold exceeded
	2.	Re-start the test to reset the log file
020-197-XXX	1.	Make sure the component that is called
PCI test warning
		out is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2.	Re-run test
	3.	Replace the component that is called out
		in warning statement
	4.	Replace the component under test
020-198-XXX	1.	If a component is called out, make sure
PCI test aborted
		it is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2.	Flash the system and re-test. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3.	Go to “Undetermined problems” on page
		80

Chapter 7. Symptom-to-FRU index 65