Lenovo 7717 XXX If a component is called out, make sure, It is connected and/or enabled. See

Diagnostic Error Code	FRU/Action
001-197-XXX	1.	Make sure the component that is called
System test warning
		out is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2. Re-run test
	3. Replace the component that is called out
		in warning statement
	4. Replace the component under test
001-198-XXX	1.	If a component is called out, make sure
System test aborted
		it is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 49
	2. Flash the system and retest. See
		“Updating (flashing) the BIOS from a
		disc” on page 380
	3. Go to “Undetermined problems” on page
		80
001-199-XXX	1.	Go to “Undetermined problems” on page
System test failed, cause unknown
		80
	2. Flash the system and re-test
	3. Replace component under function test
001-250-XXX	System board
System ECC error
001-254-XXX	System board
001-255-XXX
001-256-XXX
001-257-XXX
System DMA error
001-260-XXX	System board
001-264-XXX
System IRQ error
001-268-XXX	1.	Device on IRQ1
System IRQ1 failure
	2.	System board
001-269-XXX	1.	Device on IRQ2
System IRQ2 failure
	2.	System board
001-270-XXX	1.	Device on IRQ3
System IRQ3 failure
	2.	System board
001-271-XXX	1.	Device on IRQ4
System IRQ4 failure
	2.	System board
001-272-XXX	1.	Device on IRQ5
System IRQ5 failure
	2.	System board
001-273-XXX	1.	Diskette Cable
System IRQ6
	2.	Diskette drive
(diskette drive) failure
	3.	System board
001-274-XXX	1.	Device on IRQ7
System IRQ7 failure
	2.	System board

Chapter 7. Symptom-to-FRU index 57