•MAC address (Internal LAN)
Config menu
If you need to change the configuration of your computer, select Config from the ThinkPad Setup menu.
The following table lists the Config menu items.
Notes:
•Default values are in boldface. The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
•On each submenu, press the Enter key to show selectable options and select a desired option, or type desired values from the keyboard directly.
•Some items are displayed on the menu only if the computer supports the corresponding features.
Table 5. Config menu items
Menu item | Submenu item | Value | Comments | ||
|
|
|
|
| |
Network | Wake On LAN | • | Disabled | Enable the system to power | |
|
| • | AC only | on when the Ethernet | |
|
| controller receives a magic | |||
|
| • | AC and Battery | ||
|
| packet (a special network | |||
|
|
|
| message). | |
|
|
|
| If you select AC Only, | |
|
|
|
| Wake on LAN is enabled | |
|
|
|
| only when the ac power | |
|
|
|
| adapter is attached. | |
|
|
|
| If you select AC and | |
|
|
|
| Battery, Wake on LAN is | |
|
|
|
| enabled with any power | |
|
|
|
| sources. | |
|
|
|
| Notes: | |
|
|
|
| • | AC power is required |
|
|
|
|
| with magic packet type |
|
|
|
|
| Wake on LAN. |
|
|
|
| • | The Wake on LAN |
|
|
|
|
| function does not |
|
|
|
|
| work when a hard disk |
|
|
|
|
| password is set. |
|
|
|
|
| |
| Ethernet LAN Option ROM | • | Disabled | Load the Ethernet LAN | |
|
| • | Enabled | Option ROM to enable | |
| (for Legacy Only boot | startup from an integrated | |||
|
|
| |||
| mode or Both with Legacy |
|
| network device. | |
| first) |
|
|
|
|
|
|
|
|
| |
| UEFI IPv4 Network Stack | • | Disabled | Enable or disable IPv4 | |
|
| • | Enabled | (Internet Protocol Version 4) | |
| (for UEFI Only boot mode | network stack for the UEFI | |||
|
|
| |||
| or Both with UEFI first) |
|
| environment. | |
|
|
|
|
|
|
