Troubleshooting
Setup troubleshooting
Incorrect language appears on the display
These are possible solutions. Try one of the following:
Change the language selection during initial setup
After you select a language, Language appears again on the display. To change the selection:
1Press or repeatedly until the language you want appears on the display.
2Press to save.
Select a different language after initial setup
1From the control panel, press Settings.
2Press or repeatedly until Device Setup appears.
3Press .
4Press or repeatedly until Language appears.
5Press .
6Press or repeatedly until the language you want appears on the display.
7Press to save.
Power button is not lit
These are possible solutions. Try one or more of the following:
Press power button
Make sure the printer is on by pressing .
Disconnect and reconnect the power cord
1Disconnect the power cord from the wall outlet, and then from the printer.
2Plug the cord all the way into the power supply on the printer.
Troubleshooting