Lexmark 5000 Series Loading transparencies, Loading iron-on transfers, Loading custom-size paper

•You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam.

•The labels are loaded in the center of the paper support.

•The paper guides rest against the edges of the labels.

Note: Labels require more drying time. Remove each sheet of labels as it exits, and allow it to dry to avoid ink smudging.

Loading transparencies

You can load up to 50 transparencies at a time.

1Load transparencies with the rough side facing you. If the transparencies have a removable strip, each strip should face away from you and down toward the printer.

2Make sure:

•The transparencies are loaded in the center of the paper support.

•The paper guides rest against the edges of the transparencies.

Notes:

•Transparencies with paper backing sheets are not recommended.

•Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging.

Loading iron-on transfers

You can load up to 10 iron-on transfers at once, but you will achieve best results loading them one at a time.

1Load iron-on transfers with the print side of the transfer facing you.

2Make sure:

•You follow the loading instructions that came with the iron-on transfers.

•The transfers are loaded in the center of the paper support.

•The paper guides rest against the edges of the transfers.

Loading custom-size paper

You can load up to 100 sheets of custom-size paper at a time.

1Load paper with the print side facing you.

2Make sure:

•The paper size fits within these dimensions: Width:

–76.0–216.0 mm

–3.0–8.5 inches

Length:

–127.0–432.0 mm

–5.0–17.0 inches

•The stack height does not exceed 10 mm.

•The paper is loaded in the center of the paper support.

•The paper guides rest against the edges of the paper.

Printing

45