1Load paper.
2Load an original document facedown in the Automatic Document Feeder (ADF).
3From the control panel, press Copy Mode.
4Press .
5Press or repeatedly until Collate appears.
6Press .
7Press or repeatedly until On appears.
Note: You can collate copies only if you did not make any changes in the Resize menu.
8Press Start Color or Start Black.
Related topics:
•“Making a copy” on page 60
•“Collating copies using the computer” on page 49
•“Using the control panel” on page 95
Canceling a copy after document is loaded
If you have loaded a document into the Automatic Document Feeder (ADF) and the printer roller has started pulling it into the printer, but you have not yet initiated your copy job:
1Pull the control panel up.
2Gently lift your original document out of the ADF.
3Push the control panel down until it snaps into place.
Related topics:
•“Using the control panel” on page 95
Copying
63