Pin Multiplexing

Multi-Purpose Pins Functional Summary

4 Pin Multiplexing

4.1Multi-Purpose Pins Functional Summary

The 88F6281 device contains 50 Multi-Purpose Pins (MPP). Each one can be assigned to a different functionality through the MPP Control register.

„General Purpose pins: MPP[5:0] and MPP[49:7]:

GPIO (input/output): MPP[0], MPP[4], MPP[9:8], MPP[11], MPP[17:13], MPP[32:20], and MPP[49:34]

GPO (output): MPP[3:1], MPP[5], MPP[7], MPP[10], MPP[12], MPP[19:18], and MPP[33]

„SYSRST_OUTn: Reset request from the device to the board reset logic. This pin is an output. SYSRST_OUTn is the default setting for MPP[6].

„PEX_RST_OUTn: Optional PCI Express Endpoint card reset output.

„MII/MMII/GMII/RGMII interface signals

„SATA0/1_ACTn/SATA0/1_PRESENTn (port 0 and port 1): SATA active and SATA present indications—see the SATA section in the 88F6180, 88F6190, 88F6192, and 88F6281 Functional Specifications.

„NF_IO[7:0] (NAND Flash data [7:0])

„SPI interface: SPI_MOSI, SPI_MISO, SPI_SCK, SPI_CSn

„UART interface (port 0 and port 1): Transmit and receive functions: UA0_TXD, UA0_RXD,

UA1_TXD, UA1_RXD, and Modem control functions: UA0_RTSn, UA0_CTSn, UA1_RTSn, UA1_CTSn

„SDIO interface: SD_CLK, SD_CMD, SD_D[3:0]

„Audio interface signals: AU_SPDIFI, AU_SPDIFO, AU_SPDIFRMCLK, AU_I2SBCLK, AU_I2SDO, AU_I2SLRCLK, AU_I2SMCLK, AU_I2SDI, AU_EXTCLK

„TS (Transport Stream) interface signals: TSMP[12:0]

„TDM/SPI interface signals: TDM_CH0/2_TX_QL, TDM_CH0/2_RX_QL, TDM_SPI_CS0/1, TDM_SPI_SCK, TDM_SPI_MOSI, TDM_SPI_MISO, TDM_CODEC_INTn, TDM_CODEC_RSTn, TDM_PCLK, TDM_FS, TDM_DRX, TDM_DTX

„PTP signals: PTP_EVENT_REQ, PTP_TRIG_GEN, PTP_CLK

„TWSI signals: TW_SDA, TW_SCK

Copyright © 2008 Marvell

 

Doc. No. MV-S104859-U0 Rev. E

December 2, 2008, Preliminary

Document Classification: Proprietary Information

Page 51

Page 51
Image 51
Marvel Group 88F6281 specifications Pin Multiplexing, Multi-Purpose Pins Functional Summary