Measurement Specialties 9116 user manual Table of Contents

Pressure Systems, Inc.Model 9116 User’s Manual

Table of Contents (continued)

	3.1.3	Responses		22
		3.1.3.1 Interpreting Offset Values (Re-zero Calibration Adjustment)		23
		3.1.3.2 Interpreting Gain Values (Span Calibration Adjustment)		23
		3.1.3.3 Interpreting Engineering Units Output		23
	3.1.4	Functional Command Overview		23
		3.1.4.1	Startup Initialization	24
		3.1.4.2	Module Data Acquisition	24
		3.1.4.3 Calibration Adjustment of Offset/Gain Correction Coefficients		25
		3.1.4.4 Delivery of Acquired Data to Host		26
		3.1.4.5 Network Query and Control Functions		27
		3.1.4.6	Other Functions	27
3.2	Detailed Command Description Reference			28
	TCP/IP Commands
		Power Up Clear (Command ‘A’)		29
		Reset (Command ‘B’)		30
		Configure/Control Multi-point Calibration (Command ‘C’)		31
		Sub-command Index 00: Configure & Start Multi-Point Calibration		32
		Sub-command Index 01: Collect Data for a Calibration Point		34
		Sub-command Index 02: Calculate & Apply Correction Coefficients		36
		Sub-command Index 03: Abort Multi-Point Calibration		38
		Read Tranducer Voltages (Command ‘V’)		39
		Calculate and Set Gains (Command ‘Z’)		41
		Read Transducer A/D Counts (Command ‘a’)		43
		Read High-Speed Data (Command ‘b’)		45
		Define/Control Autonomous Host Streams (Command ‘c’)		46
		Sub-command Index 00: Configure a Host Delivery Stream		48
		Sub-command Index 01: Start Streams(s)		52
		Sub-command Index 02: Stop Stream(s)		54
		Sub-command Index 03: Clear Stream(s)		55
		Sub-command Index 04: Return Stream Information		56
		Sub-command Index 05: Select Data in a Stream		58
		Sub-command Index 06: Select Protocol for Stream Delivery		61
		Calculate and Set Offsets (Command ‘h’)		63
		Read Temperature Counts (Command ‘m’)		65
		Read Temperature Voltages (Command ‘n’)		67
		Read Module Status (Command ‘q’)		69
		Read High-Precision Data (Command ‘r’)		72
		Read Transducer Temperature (Command ‘t’)		74
		Read Internal Coefficients (Command ‘u’)		76
		Download Internal Coefficients (Command ‘v’)		80
		Set/Do Operating Options/Functions (Command ‘w’)		83
	UDP/IP Commands
		Network Query (UDP/IP Command ‘psi9000’)		87
		Re-Boot Module (UDP/IP Command ‘psireboot’)		89
		Change Module’s IP Address Resolution Method & Re-Boot
			(UDP/IP Command ‘psirarp’)	90

Page iii www.PressureSystems.com