Measurement Specialties 9116 Auto UDP Broadcast@Reset, as hex state, Hardware trigger mode

Pressure Systems, Inc.Model 9116 User’s Manual

	IP Address Resolution Method, as hex state: (default = 0000)
	0000 = Use Static IP Address stored in module’s non-volatile
06	memory	13
	0001 = Get Dynamic IP Address from external RARP/BOOTP
	server
	Host Response/Stream Back-Off Delay, as hex value (or FFFF). FFFF
07	means use low-order byte of module’s Ethernet Address as value	14
	instead. In either case, back-off delay in microseconds is calculated from
	decimal equivalent of hex value:
	delay = decvalue * 20
	Host Response/Stream Total Size Prefix (with 2-bytebig-endian binary
	value), added to all command responses and streams to indicate their
08	true length in bytes:	16
	0000 = None (default)
	0001 = Yes
09	TCP Connect Port, as hex value (e.g. 2328 = 9000 decimal, default).	17
	Auto UDP Broadcast@Reset, as hex state:
0A	0000 = No (default)	18
	0001 = Yes
	Temperature Status of Each Scanner Transducer, as 16-bit hex bit
	map, each bit representing the current status of a transducer/channel
0C	(16-1)). Bit values are:
	0= transducer operating within the specified operational limits.
	1= transducer operating outside the specified limits.
	(see end-of-table NOTE +)
0D	Minimum Temperature Alarm Set Point (in degrees C), as decimal (**)	19
	format 0 representation of internal IEEE float, with leading space).
0E	Maximum Temperature Alarm Set Point (in degrees C), as decimal (**)	19
	format 0 representation of internal IEEE float, with leading space).
11	Thermal Update Scan Interval (in seconds) as decimal (**) integer	1B
	value.
31	Module hardware version number in the form e.eeeeee. (9016 returns
	‘N08’
	Hardware trigger mode.
32	0=positive going edge	32
	1=negative going edge
	2=trigger on any edge
	(9016 returns a ‘N08’)
	Temperature Range, as a hex value
3c	0000 = range 0 to 60ºC (default)
	0006 = range -30 to 60º C
	0007 = range -20 to 70ºC

(+)NOTE: This 4-byte hex status fields may also be returned in autonomous data streams, but as pure binary extensions of each stream’s packet binary header (see ‘c’ command, ii=05, bbbb=0002).

Page 70 www.PressureSystems.com