Measurement Specialties 9116 user manual Position, W1200, W0C01

Pressure Systems, Inc. Model 9116 User’s Manual

The Valve Position indexes (ii=12 and ii=0C) each have two states (00/01) that when combined provide four (4) possible states of the C1/C2/C3/C4 internal valves. This “Logical Rotary Switch” with four (4) positions is summarized in the following chart:

	C1 Energized	C2 Energized
	C2 Not	C1 Not
	(0C=01)	(0C=00)
C3 Energized	PURGE	LEAK/CHECK
C4 Not
	position	position
(12=01)
C4 Energized	CAL/RE-ZERO	RUN
C3 Not
	position	position
(12=00)

Example:

●Send TCP/IP commands to Model 9116 module (via its connected socket) setting the calibration valve to the CAL (or Re-Zero) position:

“w1200"	(Set RUN/CAL valve position)
“w0C01”	(Set CAL position)

Responses (both commands):

“A”

“A”

Note

If the programmer “knows” that the module is already in the RUN/CAL valve mode, the first command above is optional. For more information, see Figures 4.1 through 4.4 in Chapter 4.

Page 86 www.PressureSystems.com