Measurement Specialties 9116 user manual Description ‘q’ read Index

Pressure Systems, Inc.Model 9116 User’s Manual

	ii		dd		Description	‘q’ read
						index
31		00		Set module type alias. 1 eeee=9116 (default) or 9016		00
			dd	Set hardware trigger mode. 2		32
32					dd=00 trigger on positive going edge (default)
					dd=01 trigger on negative going edge
					dd=02 trigger on any edge (duty cycle must be taken into
					account in order to avoid over-triggering)
		00			Set temperature range = 0 to 60ºC (default)
	3c	06			Set temperature range = -30 to 60ºC
		07			Set temperature range = -20 to 70ºC

1.The set module type alias command instructs the 9116 to identify itself as a 9016 in response to the ‘psi9000' UDP broadcast command, the UDP startup broadcast messages, and in response to the q0 command. This command is provided in support of legacy software. Valid command responses are; ‘A’ - acknowledge, ‘N08’ - invalid command (9016s always return’N08’), and ‘N07’ - invalid alias type. The module type alias setting can be made nonvolatile with the ‘w07’ command.

2.The Set hardware trigger mode is always volatile and will be set to the default upon any interruption of power. Valid command responses are; ‘A’ - acknowledge and ‘N08’ - invalid command (9016s always return ‘N08’).

Modification of option 13 hex results in the new option selection becoming the module’s new power-on default. All other options must be stored in non-volatile flash memory using ‘w07’ command in order to be retained after the module power cycles.

Page 85 www.PressureSystems.com