Metz 54 MZ-3 Operating concept, Light , zoom formats and flash bracketing Fb

Operating concept

Filosofia di azionamento

Filosofía de manejo

2.4.2Selecting and setting the special functions

Additional special functions can be selected in each flash mode with the Select button.

By depressing the Select button you can call the special functions "Bleep" , automatic switch-off (clock sym- bol), REAR3) (second-curtain synchronisation), modelling

light , zoom formats and flash bracketing "Fb".

3)only with SCA adapter and camera which support this function.

The icon of the given function flashes after the special function has been set, and the functional status (OFF or ON) is shown on the LC display.

The selected function is switched on or off by turning the setting disk.

The set function is stored by pressing the setting disk.

Note: The individual flash modes are explained in a separate chapter!

2.4.3Setting ISO / Zoom / Aperture , „P“ Par- tial Light Output and EV (flash exposure correction)

Turn the setting disk to select the required function (ISO / Zoom / Flash Exposure Correction „EV“) on the right- hand side of the LC display. The selected function is indi- cated by an arrow ￿.

Push the setting disk in the direction of the arrow to change the function. The arrow ￿ on the LC display will flash. Change the status by turning the setting disk. To store press the setting disk in the direction of the arrow. The selected setting will be automatically stored after approx. 5 seconds if the setting disk is not pressed. The arrow at the selected position will stop flashing after sto- rage.

☞When operating the mecablitz with an SCA 3xx2 adapter it may not be possible to change the f–stop (depending on the camera type and SCA adapter)!

When operating the mecablitz with an SCA 3xx2 adapter it may not be possible to change the ISO film speed, or the ISO film speed may not be dis- played (depending on the camera type and SCA adapter)!

Note: The individual settings are explained in a separate chapter!

16