Stroboscopic mode

Modo flash stroboscopico

Funcionamiento Estroboscópico

very dark or far behind the moving subject. Best results are achieved with a low ambient light level.

Table 5 of the Technical Data specifies the maximum partial light output levels for N - f(Hz) combinations.

Ensure that a sufficiently slow shutter speed is set on the camera.

Table 6 of the Technical Data specifies the fastest came- ra shutter speeds for the N - f(Hz) combinations.

58

Page 58
Image 58
Metz 54 MZ-3 operating instructions Stroboscopic mode, Modo flash stroboscopico Funcionamiento Estroboscópico