4.1 Sub-modes of the automatic flash mode
Different sub-modes can be set when the mecablitz is in
auto flash mode A:
• Auto-remote with address „Ad 1“ (see Chapter Metz
Remote Mode)
• Auto-remote with address „Ad 2“ (see Chapter Metz
Remote Mode)
Setting a sub-mode of the automatic flash mode:
• Depress the Modebutton repea tedly until Aflashes on
the display.
• Turn the setting disk to set the desired sub-mode.
• Push the setting disk in the direction of the arrow for
storage.The selected sub-mode will be automatically
stored after approx.5 seconds if the setting disk is not
pressed.After storage, icon Awill stop flashing.
28
Automatic flash mode
Modo flash Auto
Funcionamiento Automático
700 47 0078-A4 PDF GB-I-E 30.09.2008 14:12 Uhr Seite 28