Document Feeding, Document Types | Minolta CF2002 manual

Original Documents Chapter 4

	4	4.1 Document Feeding
	4

4.1Document Feeding

The document can be fed in one of two different ways. Be sure to position the doc- ument correctly according to the type of document being copied.

Document Feed Method	Features
Multi-sheet feeding	Using the duplexing document feeder, a multi-page document can be
	fed automatically. This feed method can also be used with double-
	sided documents, and is perfect for multi-page double-sided
	documents. See page 4-5.

Manual feeding	The document is placed directly on the original glass, then scanned.
	Each page of the document must be positioned manually (i.e., the
	previous one must be removed and the next one placed on the original
	glass).
	This method is best with books and other documents that cannot be fed
	through the duplexing document feeder. See page 4-10.

Document Types

Note

Be sure to use the document paper type appropriate for the feed method being used. If the correct paper type is not used, a paper misfeed or damage to the document may occur.

Multi-sheet feeding (Plain paper)

	Single-sided documents	Double-sided documents
Document paper	Plain paper: 9-1/4 lbs. to 34 lbs.	Plain paper: 13-1/4 lbs. to 29-1/4 lbs.
type	(35 g/m2 to 128 g/m2)	(50 g/m2 to 110 g/m2)
Document paper	Ledger L (11 in. × 17 in. L), Legal L (8.5 in. × 14 in. L), FLS. L (8.5 in. × 13 in. L),
size	Letter L (8.5 × 11 in. L), Letter C (8.5 in. × 11 in. C), Invoice L (5.5 in. × 8.5 in L),
	Invoice C (5.5 in. × 8.5 in. C), 11 in. × 15 in.

Paper capacity	100 sheets (21-1/4 lbs.)

Orientation	Face-up, Normal direction

Multi-sheet feeding (Thick paper)

	Single-sided documents
Document paper	Plain paper: 34-1/4 lbs. to 55-3/4 lbs.
type	(129 g/m2 to 210 g/m2)
Document paper	Ledger L (11 in. × 17 in. L), Legal L (8.5 in. × 14 in. L), FLS. L (8.5 in. × 13 in. L),
size	Letter L (8.5 × 11 in. L), Letter C (8.5 in. × 11 in. C), Invoice L (5.5 in. × 8.5 in L),
	Invoice C (5.5 in. × 8.5 in. C), 11 in. × 15 in.

Paper capacity	38 sheets (55-3/4 lbs.)

Orientation	Face-up, Normal direction

4-2	CF2002/CF3102

Image 75

Minolta CF2002 Document Feeding, Document Types, Multi-sheet feeding Plain paper, Multi-sheet feeding Thick paper

Contents

CF2002/CF3102 Contents Print Area Stopping PrintingInterrupting a Copy Job To interrupt copying Document Feeding Selecting a Color SettingSelecting a Finishing Setting Specifying a Zoom Setting To check the settings To change the settings Copy SettingsSelecting a Photo/Density Setting Checking the Settings Index Description of JobsJob Log Screens Job Control Screens Advanced Operations Administrator OperationsEnlarge Display Mode Operation Guide Available Features Auxiliary Functions Scanning Operations Before Making Copies Structure of the Manual Introduction Introduction Available Features Color SettingsSorting Available Features Finishing SettingsZoom Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Select this setting when copying glossy images Densty SettingsText Enhancement Setting Glossy Mode Setting Before Making Copies Chapter Making Copies Before Names of Control Panel Parts and Their Functions Names of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel To adjust the angle of the control panel Adjusting the Angle of the Control Panel To turn the copier on When the copier is turned onAuto Panel Reset Turning the Copier On and Off Energy Saver Mode To recover from Energy Saver modeSleep Mode To recover from Sleep mode When the copier is turned off Turning the Copier On and OffTo turn the copier off Using the Touch Panel Default SettingsDescription of the Touch Panel Tip Using the Touch Panel Structure of the Display Settings screen Be careful not to damage the touch panel Operating the Touch Panel Before Making Copies Chapter Basic Copy 2 Operations Making Basic Copies Procedure for making basic copies is described below Making Basic Copies Basic Copy Operations Chapter Practical Copy Examples Practical Copy ExamplesTo make a copy that is the same size as the original To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter Job can be canceled while it is being printed Stopping PrintingTo stop/restart/delete a print job Stopping Printing To interrupt copying Interrupting a Copy Job Interrupting a Copy Job To make a test copy Making Test Copies Copy 1 Set Basic Copy Operations Chapter Making Copies Using Accounts Using the Copy Track FunctionTo make copies when accounts are specified Loading Paper Paper Specifications Use paper that meets the following specificationsPaper Types Standard paper Paper SpecificationsPaper Sizes Non-standard paper Paper can be used Paper CapacityPaper feed unit and large capacity cabinet are optional Types of paper can be used Loading Paper Chapter Print Area Paper StoragePaper output direction Order for selecting another paper drawer Automatically Selecting the Paper SourceAutomatically Selecting the Paper Source Operating conditions Loading Paper Into the 1st Drawer Loading Paper Loading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP Setting the Paper Size for the 1st Drawer To set the paper sizeTouch Paper To set a non-standard custom paper size To set a paper size in metric measurements To store a non-standard custom paper size To select a stored non-standard custom paper size Pull out the paper drawer Press down on the paper-lifting Loading Paper Into the 2nd Drawer or a Paper Feed Unit To set the Specialty Paper function Specialty Paper function Pull out the paper drawer Loading Paper Into the Large Capacity Cabinet Loading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Multi-sheet feeding Thick paper Document FeedingDocument Types Multi-sheet feeding Plain paper Possible combinations for mixed original paper sizes Mixed Originals Paper Sizes Document Precautions Manual Feeding Document Precautions Multi-Sheet Feeding Feeding the Document Feeding the DocumentMulti-Sheet Feeding Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Align the document with the docu- ment scales Manual Feeding Original Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings To select the Color setting Selecting a Color Setting Selecting a Finishing Setting Selecting a Finishing SettingAutomatic Sort/Non-Sort Setting Selection Crisscross Sorting Sort Setting Non-Sorting Non-Sort SettingCrisscross Non-Sorting Non-Sort Setting Sorting Sort Setting Stapling with finisher FN-116 installed Stapling with finisher FN-8 installedHole-Punching To specify Finishing settings Selecting a Finishing Setting Enlarging Enlarge Settings Specifying a Zoom SettingAutomatic Scaling Auto Size Setting Specifying Full Size ⋅ 1.000 Setting To specify a Zoom setting Minimizing Minimal SettingCustom Sizing CustomZoom Setting Vertical and Horizontal Scaling X/Y Zoom Setting Minimal zoom ratios To recall a stored custom zoom ratio Selecting the Paper Setting Selecting the Manual Bypass Tray Bypass SettingSelecting the Paper Manually Selecting the Paper Setting Small-Sized DocumentsCentering To select the Paper setting Auto Paper Source Selection Feature Selecting the Orig Copy Settings Original Set- tings Selecting the Orig Copy Settings Original SettingsOriginal Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Example For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density Setting Specifying the Image Type Photo/Density Settings Reducing Moire Effects Screen Pattern Settings Enhancing Text Text Enhancement SettingSpecifying a Glossy Finish Glossy Mode Setting Select this setting for copies with a glossy finish To select a Photo/Density setting Specifying Copy Settings Chapter To select a Screen Pattern setting To select a glossy finish Glossy Mode setting Checking the Settings Checking the SettingsTo check the settings To change the settings Controlling Jobs Queuing jobs Multi-job featureDescription of Jobs Job Controlling Jobs Chapter Print List Screen Job Log Screens Scan List Screen Job Log Screens Job List Screen Print Log Screen Item Name Description Job status Scan Log Screen Scanned Job Screen Job Control Screens Job Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs Jobs programmed in user boxes can be printed UserBox Screen Touch Job Log, and check the status of the jobs To print a job from a user box Memory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Scan key Start key Stop key Touch panel Access key Clear key Copy key Interrupt key KeypadIndex Index Index Copy 1 set Copy settings Copy track Density setting BackgroundDouble-sided 2in1 copies Double-sided 4in1 copies Orig Copy 10,4-2,4-105-32 26,5-28 Specialty paper Index Photo Image settingPostcard Power switch Turning OFF Turning on Print area Enlargement Text & Photo setting 5-32 Text settingZoom settings 5-8 Auto size 5-9 Copyright