Minolta CF2002 Stapling with finisher FN-116 installed, Stapling with finisher FN-8 installed

5.2 Selecting a Finishing Setting 5

The “Criss Cross Mode” function on the User’s Choice: 2 screen must be set to “Yes”.

❍For details on the “User’s Choice” functions, refer to “Specifying Default Set- tings (“User’s Choice” Functions)” in the Administrator Operations volume.

Stapling (with finisher FN-116 installed)

The copies are bound together with a staple in the corner.

However, stapling is only performed if the following conditions are met.

The number of copies is set to between 2 and 30.

If standard-size paper is used, the paper sizes must be Letter L, Letter C, Exec- utive L (7-1/4 ⋅ 10-1/2 in. L), Executive C (7-1/4 ⋅ 10-1/2 in. C), Legal L and 11 ⋅ 17 L.

If nonstandard-size paper is used, the paper width must be between 7-1/4 in. and 11-3/4 in.

If nonstandard-size paper is used, the paper length must be between 7-1/4 in. and 17 in.

The copier must not enter Interrupt mode.

Stapling (with finisher FN-8 installed)

The copies are bound together with a staple. Either the “Corner Staple” or the “2- Point Staple” Finishing setting can be selected.

However, stapling is only performed if the following conditions are met.

The number of copies is set to between 2 and 50. (However, if the paper length is 11-3/4 in. or more, the number of copies can only be set to 25 or less.)

If standard-size paper is used, the paper sizes must be Letter L, Letter C, Legal L and 11 ⋅ 17 L.

If nonstandard-size paper is used, the paper width must be between 7-1/4 in. and 11-3/4 in.

If nonstandard-size paper is used, the paper length must be between 7-1/4 in. and 17 in.

The copier must not enter Interrupt mode.

Hole-Punching

Two holes for filing copies in binders can be punched. The position of the punched holes can be specified along the left side or along the top.

However, hole-punching is only performed if the following conditions are met.

Finisher FN-8 is installed.

Punch kit PK-4 is installed.

If standard-size paper is used, the paper sizes must be as follows:

Letter L, Letter C, Legal L and 11 ⋅ 17 L (with the “2-Hole Punch” setting) Letter C and 11 ⋅ 17 L (with the “3-Hole Punch” setting).

CF2002/CF3102 5-5

Specifying Copy Settings Chapter 5