Minimizing Minimal Setting, Zooming | Minolta CF2002 instruction

5.3 Specifying a Zoom Setting	5

Minimizing (“Minimal” Setting)

The copy is slightly reduced (⋅0.930).

Selecting the “Minimal” setting ensures that any part of the original positioned at the edge of the page will not be cut off in the copy.

The zoom ratio of the “Minimal” setting can be changed to any ratio between ⋅0.900 and ⋅0.999.

❍For details on changing the zoom ratio, refer to “Specifying a Custom Zoom Ratio (“CustomZoom” Setting)”.

Zooming

Any zoom ratio (between ⋅0.250 and ⋅4.000) can be specified.

Touch and to specify the desired zoom ratio. Each

time or is touched, the zoom ratio is increased or decreased by an increment of ⋅0.001.

Custom Sizing (“CustomZoom” Setting)

Any zoom ratio (between ⋅0.250 and ⋅4.000) can be specified.

Use the keypad to enter the desired zoom ratio.

Up to two zoom ratios entered using the keypad can be stored.

Vertical and Horizontal Scaling (“X/Y Zoom” Setting)

The copy size can be changed by specifying different scaling proportions (between ⋅0.250 and ⋅4.000) for the vertical and the horizontal dimention.

To specify a Zoom setting

1Touch [Zoom].

A screen appears, showing the available Zoom settings.

2Select the desired Zoom setting.

Specifying Copy Settings Chapter 5

CF2002/CF3102

5-9

Image 96

Minolta CF2002 user manual Minimizing Minimal Setting, Zooming, Custom Sizing CustomZoom Setting, To specify a Zoom setting

Contents

CF2002/CF3102 Contents Stopping Printing Interrupting a Copy JobTo interrupt copying Print Area Selecting a Color Setting Selecting a Finishing SettingSpecifying a Zoom Setting Document Feeding Copy Settings Selecting a Photo/Density SettingChecking the Settings To check the settings To change the settings Description of Jobs Job Log ScreensJob Control Screens Index Administrator Operations Enlarge Display Mode Operation GuideAvailable Features Auxiliary Functions Scanning Operations Advanced Operations Before Making Copies Introduction Structure of the Manual Introduction Available Features Color SettingsSorting Available Features Finishing SettingsZoom Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Densty Settings Text Enhancement SettingGlossy Mode Setting Select this setting when copying glossy images Before Making Copies Chapter Names of Control Panel Parts and Their Functions Making Copies Before Names of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel Adjusting the Angle of the Control Panel To adjust the angle of the control panel When the copier is turned on Auto Panel ResetTurning the Copier On and Off To turn the copier on Energy Saver Mode To recover from Energy Saver modeSleep Mode To recover from Sleep mode When the copier is turned off Turning the Copier On and OffTo turn the copier off Using the Touch Panel Default SettingsDescription of the Touch Panel Using the Touch Panel Tip Settings screen Structure of the Display Operating the Touch Panel Be careful not to damage the touch panel Before Making Copies Chapter Basic Copy 2 Operations Procedure for making basic copies is described below Making Basic Copies Making Basic Copies Basic Copy Operations Chapter Practical Copy Examples Practical Copy ExamplesTo make a copy that is the same size as the original To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter Job can be canceled while it is being printed Stopping PrintingTo stop/restart/delete a print job Stopping Printing Interrupting a Copy Job To interrupt copying Interrupting a Copy Job Making Test Copies Copy 1 Set To make a test copy Basic Copy Operations Chapter Making Copies Using Accounts Using the Copy Track FunctionTo make copies when accounts are specified Loading Paper Paper Specifications Use paper that meets the following specificationsPaper Types Paper Specifications Paper SizesNon-standard paper Standard paper Paper Capacity Paper feed unit and large capacity cabinet are optionalTypes of paper can be used Paper can be used Loading Paper Chapter Print Area Paper StoragePaper output direction Automatically Selecting the Paper Source Automatically Selecting the Paper SourceOperating conditions Order for selecting another paper drawer Loading Paper Loading Paper Into the 1st Drawer Loading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP Setting the Paper Size for the 1st Drawer To set the paper sizeTouch Paper To set a paper size in metric measurements To set a non-standard custom paper size To store a non-standard custom paper size To select a stored non-standard custom paper size Loading Paper Into the 2nd Drawer or a Paper Feed Unit Pull out the paper drawer Press down on the paper-lifting Specialty Paper function To set the Specialty Paper function Loading Paper Into the Large Capacity Cabinet Pull out the paper drawer Loading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Document Feeding Document TypesMulti-sheet feeding Plain paper Multi-sheet feeding Thick paper Mixed Originals Paper Sizes Possible combinations for mixed original paper sizes Document Precautions Multi-Sheet Feeding Document Precautions Manual Feeding Feeding the Document Feeding the DocumentMulti-Sheet Feeding Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Manual Feeding Align the document with the docu- ment scales Original Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings Selecting a Color Setting To select the Color setting Selecting a Finishing Setting Selecting a Finishing SettingAutomatic Sort/Non-Sort Setting Selection Non-Sorting Non-Sort Setting Crisscross Non-Sorting Non-Sort SettingSorting Sort Setting Crisscross Sorting Sort Setting Stapling with finisher FN-116 installed Stapling with finisher FN-8 installedHole-Punching To specify Finishing settings Selecting a Finishing Setting Specifying a Zoom Setting Automatic Scaling Auto Size SettingSpecifying Full Size ⋅ 1.000 Setting Enlarging Enlarge Settings Minimizing Minimal Setting Custom Sizing CustomZoom SettingVertical and Horizontal Scaling X/Y Zoom Setting To specify a Zoom setting Minimal zoom ratios To recall a stored custom zoom ratio Selecting the Paper Setting Selecting the Manual Bypass Tray Bypass SettingSelecting the Paper Manually Selecting the Paper Setting Small-Sized DocumentsCentering Auto Paper Source Selection Feature To select the Paper setting Selecting the Orig Copy Settings Original Set- tings Selecting the Orig Copy Settings Original SettingsOriginal Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Copy Settings Example For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density Setting Specifying the Image Type Photo/Density Settings Enhancing Text Text Enhancement Setting Specifying a Glossy Finish Glossy Mode Setting Select this setting for copies with a glossy finish Reducing Moire Effects Screen Pattern Settings To select a Photo/Density setting Specifying Copy Settings Chapter To select a glossy finish Glossy Mode setting To select a Screen Pattern setting Checking the Settings Checking the SettingsTo check the settings To change the settings Controlling Jobs Multi-job feature Description of JobsJob Queuing jobs Controlling Jobs Chapter Job Log Screens Print List Screen Job Log Screens Scan List Screen Job List Screen Print Log Screen Item Name Description Job status Scan Log Screen Job Control Screens Scanned Job Screen Job Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs UserBox Screen Jobs programmed in user boxes can be printed To print a job from a user box Touch Job Log, and check the status of the jobs Memory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Access key Clear key Copy key Interrupt key Keypad IndexIndex Scan key Start key Stop key Touch panel Index Copy 1 set Copy settings Copy track Density setting BackgroundDouble-sided 2in1 copies Double-sided 4in1 copies 10,4-2,4-10 5-3226,5-28 Orig Copy Index Photo Image setting Postcard Power switch Turning OFF Turning onPrint area Specialty paper Text & Photo setting 5-32 Text setting Zoom settings 5-8 Auto size5-9 Enlargement Copyright