Loading Paper Chapter | Minolta CF2002 specs

3.5 Loading Paper	3

5Load the paper into the drawer so

that the side of the paper to be printed onto (the side facing up when the package was un- wrapped) faces up.

6 When making manual double-sid- ed copies, load the paper so that the second side (the blank side) faces up.

Note

If the paper is curled, flatten it before loading it.

Do not load so much paper that the top of the stack is higher than the Ä mark.

Do not load more than 21 sheets of special paper.

Before loading envelopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed, otherwise the envelopes may become wrinkled or a paper misfeed may occur.

When loading additional paper, remove any paper remaining in the drawer, place it on top of the new paper, and then align the paper in the stack well before loading it into the drawer. We recommend replenishing the paper only after all of the paper in the drawer has been used, otherwise a paper misfeed may occur.

Loading Paper Chapter 3

CF2002/CF3102

3-9

Image 58

Minolta CF2002 user manual Loading Paper Chapter

Contents

CF2002/CF3102 Contents To interrupt copying Stopping PrintingInterrupting a Copy Job Print Area Specifying a Zoom Setting Selecting a Color SettingSelecting a Finishing Setting Document Feeding Checking the Settings Copy SettingsSelecting a Photo/Density Setting To check the settings To change the settings Job Control Screens Description of JobsJob Log Screens Index Available Features Auxiliary Functions Scanning Operations Administrator OperationsEnlarge Display Mode Operation Guide Advanced Operations Before Making Copies Introduction Structure of the Manual Introduction Color Settings Available FeaturesSorting Finishing Settings Available FeaturesZoom Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Glossy Mode Setting Densty SettingsText Enhancement Setting Select this setting when copying glossy images Before Making Copies Chapter Names of Control Panel Parts and Their Functions Making Copies Before Names of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel Adjusting the Angle of the Control Panel To adjust the angle of the control panel Turning the Copier On and Off When the copier is turned onAuto Panel Reset To turn the copier on To recover from Energy Saver mode Energy Saver ModeSleep Mode To recover from Sleep mode Turning the Copier On and Off When the copier is turned offTo turn the copier off Default Settings Using the Touch PanelDescription of the Touch Panel Using the Touch Panel Tip Settings screen Structure of the Display Operating the Touch Panel Be careful not to damage the touch panel Before Making Copies Chapter Basic Copy 2 Operations Procedure for making basic copies is described below Making Basic Copies Making Basic Copies Basic Copy Operations Chapter Practical Copy Examples Practical Copy ExamplesTo make a copy that is the same size as the original To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter Stopping Printing Job can be canceled while it is being printedTo stop/restart/delete a print job Stopping Printing Interrupting a Copy Job To interrupt copying Interrupting a Copy Job Making Test Copies Copy 1 Set To make a test copy Basic Copy Operations Chapter Using the Copy Track Function Making Copies Using AccountsTo make copies when accounts are specified Loading Paper Use paper that meets the following specifications Paper SpecificationsPaper Types Non-standard paper Paper SpecificationsPaper Sizes Standard paper Types of paper can be used Paper CapacityPaper feed unit and large capacity cabinet are optional Paper can be used Loading Paper Chapter Paper Storage Print AreaPaper output direction Operating conditions Automatically Selecting the Paper SourceAutomatically Selecting the Paper Source Order for selecting another paper drawer Loading Paper Loading Paper Into the 1st Drawer Loading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP To set the paper size Setting the Paper Size for the 1st DrawerTouch Paper To set a paper size in metric measurements To set a non-standard custom paper size To store a non-standard custom paper size To select a stored non-standard custom paper size Loading Paper Into the 2nd Drawer or a Paper Feed Unit Pull out the paper drawer Press down on the paper-lifting Specialty Paper function To set the Specialty Paper function Loading Paper Into the Large Capacity Cabinet Pull out the paper drawer Loading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Multi-sheet feeding Plain paper Document FeedingDocument Types Multi-sheet feeding Thick paper Mixed Originals Paper Sizes Possible combinations for mixed original paper sizes Document Precautions Multi-Sheet Feeding Document Precautions Manual Feeding Feeding the Document Feeding the DocumentMulti-Sheet Feeding Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Manual Feeding Align the document with the docu- ment scales Original Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings Selecting a Color Setting To select the Color setting Selecting a Finishing Setting Selecting a Finishing SettingAutomatic Sort/Non-Sort Setting Selection Sorting Sort Setting Non-Sorting Non-Sort SettingCrisscross Non-Sorting Non-Sort Setting Crisscross Sorting Sort Setting Stapling with finisher FN-8 installed Stapling with finisher FN-116 installedHole-Punching To specify Finishing settings Selecting a Finishing Setting Specifying Full Size ⋅ 1.000 Setting Specifying a Zoom SettingAutomatic Scaling Auto Size Setting Enlarging Enlarge Settings Vertical and Horizontal Scaling X/Y Zoom Setting Minimizing Minimal SettingCustom Sizing CustomZoom Setting To specify a Zoom setting Minimal zoom ratios To recall a stored custom zoom ratio Selecting the Manual Bypass Tray Bypass Setting Selecting the Paper SettingSelecting the Paper Manually Small-Sized Documents Selecting the Paper SettingCentering Auto Paper Source Selection Feature To select the Paper setting Selecting the Orig Copy Settings Original Settings Selecting the Orig Copy Settings Original Set- tingsOriginal Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Copy Settings Example For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density Setting Specifying the Image Type Photo/Density Settings Select this setting for copies with a glossy finish Enhancing Text Text Enhancement SettingSpecifying a Glossy Finish Glossy Mode Setting Reducing Moire Effects Screen Pattern Settings To select a Photo/Density setting Specifying Copy Settings Chapter To select a glossy finish Glossy Mode setting To select a Screen Pattern setting Checking the Settings Checking the SettingsTo check the settings To change the settings Controlling Jobs Job Multi-job featureDescription of Jobs Queuing jobs Controlling Jobs Chapter Job Log Screens Print List Screen Job Log Screens Scan List Screen Job List Screen Print Log Screen Item Name Description Job status Scan Log Screen Job Control Screens Scanned Job Screen Job Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs UserBox Screen Jobs programmed in user boxes can be printed To print a job from a user box Touch Job Log, and check the status of the jobs Memory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Index Access key Clear key Copy key Interrupt key KeypadIndex Scan key Start key Stop key Touch panel Density setting Background Index Copy 1 set Copy settings Copy trackDouble-sided 2in1 copies Double-sided 4in1 copies 26,5-28 10,4-2,4-105-32 Orig Copy Print area Index Photo Image settingPostcard Power switch Turning OFF Turning on Specialty paper 5-9 Text & Photo setting 5-32 Text settingZoom settings 5-8 Auto size Enlargement Copyright