Loading Paper Into the Large Capacity Cabinet | Minolta CF2002

3.5 Loading Paper	3

Loading Paper Into the Large Capacity Cabinet

1Pull out the paper drawer.

2 Load paper into the right side of the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up.

✎

Note

If the paper is curled, flatten it before loading it.

Do not load so much paper that the top of the stack is higher than the Ä mark.

Paper other than plain paper cannot be fed from the large capacity cabinet. If you wish to make copies onto paper other than plain paper, feed it through the manual bypass tray or the 1st drawer.

When loading additional paper, remove any paper remaining in the drawer, place it on top of the new paper, and then align the paper in the stack well before loading it into the drawer. We recommend replenishing the paper only after all of the paper in the drawer has been used, otherwise a paper misfeed may occur.

3Load paper into the left side of the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up.

✎

Note

Do not load so much paper that the top of the stack is high- er than the Ä mark.

Paper other than plain paper cannot be fed from the large capacity cabinet. If you wish to make copies onto paper other than plain paper, feed it through the manual bypass tray or the 1st drawer.

The paper guide in the large capacity cabinet has been installed for Letter C- size paper.

When loading additional paper, remove any paper remaining in the drawer, place it on top of the new paper, and then align the paper in the stack well before loading it into the drawer. We recommend replenishing the paper only after all of the paper in the drawer has been used, otherwise a paper misfeed may occur.

4Close the paper drawer.

Loading Paper Chapter 3

CF2002/CF3102

3-19

Image 68

Minolta CF2002 user manual Loading Paper Into the Large Capacity Cabinet, Pull out the paper drawer

Contents

CF2002/CF3102 Contents Stopping Printing Interrupting a Copy JobTo interrupt copying Print Area Selecting a Color Setting Selecting a Finishing SettingSpecifying a Zoom Setting Document Feeding Copy Settings Selecting a Photo/Density SettingChecking the Settings To check the settings To change the settings Description of Jobs Job Log ScreensJob Control Screens Index Administrator Operations Enlarge Display Mode Operation GuideAvailable Features Auxiliary Functions Scanning Operations Advanced Operations Before Making Copies Introduction Structure of the Manual Introduction Sorting Available FeaturesColor Settings Zoom Settings Available FeaturesFinishing Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Densty Settings Text Enhancement SettingGlossy Mode Setting Select this setting when copying glossy images Before Making Copies Chapter Names of Control Panel Parts and Their Functions Making Copies Before Names of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel Adjusting the Angle of the Control Panel To adjust the angle of the control panel When the copier is turned on Auto Panel ResetTurning the Copier On and Off To turn the copier on Sleep Mode Energy Saver ModeTo recover from Energy Saver mode To recover from Sleep mode To turn the copier off When the copier is turned offTurning the Copier On and Off Description of the Touch Panel Using the Touch PanelDefault Settings Using the Touch Panel Tip Settings screen Structure of the Display Operating the Touch Panel Be careful not to damage the touch panel Before Making Copies Chapter Basic Copy 2 Operations Procedure for making basic copies is described below Making Basic Copies Making Basic Copies Basic Copy Operations Chapter To make a copy that is the same size as the original Practical Copy ExamplesPractical Copy Examples To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter To stop/restart/delete a print job Job can be canceled while it is being printedStopping Printing Stopping Printing Interrupting a Copy Job To interrupt copying Interrupting a Copy Job Making Test Copies Copy 1 Set To make a test copy Basic Copy Operations Chapter To make copies when accounts are specified Making Copies Using AccountsUsing the Copy Track Function Loading Paper Paper Types Paper SpecificationsUse paper that meets the following specifications Paper Specifications Paper SizesNon-standard paper Standard paper Paper Capacity Paper feed unit and large capacity cabinet are optionalTypes of paper can be used Paper can be used Loading Paper Chapter Paper output direction Print AreaPaper Storage Automatically Selecting the Paper Source Automatically Selecting the Paper SourceOperating conditions Order for selecting another paper drawer Loading Paper Loading Paper Into the 1st Drawer Loading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP Touch Paper Setting the Paper Size for the 1st DrawerTo set the paper size To set a paper size in metric measurements To set a non-standard custom paper size To store a non-standard custom paper size To select a stored non-standard custom paper size Loading Paper Into the 2nd Drawer or a Paper Feed Unit Pull out the paper drawer Press down on the paper-lifting Specialty Paper function To set the Specialty Paper function Loading Paper Into the Large Capacity Cabinet Pull out the paper drawer Loading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Document Feeding Document TypesMulti-sheet feeding Plain paper Multi-sheet feeding Thick paper Mixed Originals Paper Sizes Possible combinations for mixed original paper sizes Document Precautions Multi-Sheet Feeding Document Precautions Manual Feeding Multi-Sheet Feeding Feeding the DocumentFeeding the Document Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Manual Feeding Align the document with the docu- ment scales Original Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings Selecting a Color Setting To select the Color setting Automatic Sort/Non-Sort Setting Selection Selecting a Finishing SettingSelecting a Finishing Setting Non-Sorting Non-Sort Setting Crisscross Non-Sorting Non-Sort SettingSorting Sort Setting Crisscross Sorting Sort Setting Hole-Punching Stapling with finisher FN-116 installedStapling with finisher FN-8 installed To specify Finishing settings Selecting a Finishing Setting Specifying a Zoom Setting Automatic Scaling Auto Size SettingSpecifying Full Size ⋅ 1.000 Setting Enlarging Enlarge Settings Minimizing Minimal Setting Custom Sizing CustomZoom SettingVertical and Horizontal Scaling X/Y Zoom Setting To specify a Zoom setting Minimal zoom ratios To recall a stored custom zoom ratio Selecting the Paper Manually Selecting the Paper SettingSelecting the Manual Bypass Tray Bypass Setting Centering Selecting the Paper SettingSmall-Sized Documents Auto Paper Source Selection Feature To select the Paper setting Original Settings Selecting the Orig Copy Settings Original Set- tingsSelecting the Orig Copy Settings Original Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Copy Settings Example For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density Setting Specifying the Image Type Photo/Density Settings Enhancing Text Text Enhancement Setting Specifying a Glossy Finish Glossy Mode Setting Select this setting for copies with a glossy finish Reducing Moire Effects Screen Pattern Settings To select a Photo/Density setting Specifying Copy Settings Chapter To select a glossy finish Glossy Mode setting To select a Screen Pattern setting To check the settings Checking the SettingsChecking the Settings To change the settings Controlling Jobs Multi-job feature Description of JobsJob Queuing jobs Controlling Jobs Chapter Job Log Screens Print List Screen Job Log Screens Scan List Screen Job List Screen Print Log Screen Item Name Description Job status Scan Log Screen Job Control Screens Scanned Job Screen Job Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs UserBox Screen Jobs programmed in user boxes can be printed To print a job from a user box Touch Job Log, and check the status of the jobs Memory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Access key Clear key Copy key Interrupt key Keypad IndexIndex Scan key Start key Stop key Touch panel Double-sided 2in1 copies Double-sided 4in1 copies Index Copy 1 set Copy settings Copy trackDensity setting Background 10,4-2,4-10 5-3226,5-28 Orig Copy Index Photo Image setting Postcard Power switch Turning OFF Turning onPrint area Specialty paper Text & Photo setting 5-32 Text setting Zoom settings 5-8 Auto size5-9 Enlargement Copyright