Basic Copy Operations Chapter 2
| 2 | 2.5 Making Test Copies (Copy 1 Set) |
|
|
2.5Making Test Copies (Copy 1 Set)
Before printing a large number of copies, a sample copy can be printed so you can check the specified settings. This is convenient for checking the selected settings before printing.
If a job is currently being printed, that job is interrupted so one test copy can be printed. After the single test copy is printed, the interrupted job automatically con- tinues printing.
The number of copies remaining after the test print are recorded and the job is queued to be printed.
To make a test copy
1Select the desired Copy mode settings.
2In the Basic screen, touch [Copy 1 Set].
3Press the [Start] key. Scanning of the docu- ment begins, and the job is queued.
4Only one test copy is printed. Check the test copy.
A message appears,
asking if the job should be continued.
5If the remaining number of copies can be made with the current settings, touch [Yes].
The print job is queued for printing of the re- maining number of cop- ies.
CF2002/CF3102 |
