Document Precautions Multi-Sheet Feeding | Minolta CF2002 specification

Original Documents Chapter 4

	4	4.1 Document Feeding
	4

Document Precautions (Multi-Sheet Feeding)

The following types of documents should not be used, otherwise paper misfeeds or damage to the document may occur. Instead, these types of documents should be fed manually.

Rolled documents

Wrinkled or torn documents

Folded documents (folded in half or fanned)

Highly translucent or transparent documents, such as overhead transparencies or diazo photosensitive paper

Documents with binder holes (2 or 3 holes)

Documents with many binder holes, such as loose-leaf paper

Coated documents, such as heat-sensitive or carbon-backed paper

Inkjet printer paper

Documents just after printed with this copier

Document Precautions (Manual Feeding)

The following precautions should be observed when manually feeding the types of documents listed below.

Handle the documents as described.

Non-standard-sized documents

The document size cannot be detected automatically, therefore, the Paper set- ting “Auto Paper” and the Zoom setting “Auto Size” cannot be used.

❍In the Basic screen, touch [Paper], and then select the appropriate paper size setting.

For details on selecting the paper size, refer to “Selecting the Paper Setting” of “Specifying Copy Settings” (page 5-12).

Highly translucent or transparent documents, such as overhead projector transpar- encies or diazo photosensitive paper

The document size cannot be detected automatically.

❍Place a blank sheet of paper of the same size as the document over the doc- ument.

Thick objects, such as books

With thick books, the original cover, or the duplexing document feeder if it is in- stalled, cannot be closed.

❍Scan the document without closing the original cover or the duplexing docu- ment feeder.

Do not place objects exceeding 4-1/2 lbs. on the original glass. In addition, if a book is placed on the original glass, do not press it down extremely hard, other- wise the original glass may be damaged. (The original glass can withstand a weight of 4-1/2 lbs.)

4-4	CF2002/CF3102

Image 77

Minolta CF2002 user manual Document Precautions Multi-Sheet Feeding, Document Precautions Manual Feeding

Contents

CF2002/CF3102 Contents Interrupting a Copy Job Stopping PrintingTo interrupt copying Print Area Selecting a Finishing Setting Selecting a Color SettingSpecifying a Zoom Setting Document Feeding Selecting a Photo/Density Setting Copy SettingsChecking the Settings To check the settings To change the settings Job Log Screens Description of JobsJob Control Screens Index Enlarge Display Mode Operation Guide Administrator OperationsAvailable Features Auxiliary Functions Scanning Operations Advanced Operations Before Making Copies Structure of the Manual Introduction Introduction Sorting Available FeaturesColor Settings Zoom Settings Available FeaturesFinishing Settings Paper Settings Orig ÖCopy Settings Before Making Copies Chapter Photo Settings Text Enhancement Setting Densty SettingsGlossy Mode Setting Select this setting when copying glossy images Before Making Copies Chapter Making Copies Before Names of Control Panel Parts and Their Functions Names of Control Panel Parts and Their Functions Adjusting the Angle of the Control Panel To adjust the angle of the control panel Adjusting the Angle of the Control Panel Auto Panel Reset When the copier is turned onTurning the Copier On and Off To turn the copier on Sleep Mode Energy Saver ModeTo recover from Energy Saver mode To recover from Sleep mode To turn the copier off When the copier is turned offTurning the Copier On and Off Description of the Touch Panel Using the Touch PanelDefault Settings Tip Using the Touch Panel Structure of the Display Settings screen Be careful not to damage the touch panel Operating the Touch Panel Before Making Copies Chapter Basic Copy 2 Operations Making Basic Copies Procedure for making basic copies is described below Making Basic Copies Basic Copy Operations Chapter To make a copy that is the same size as the original Practical Copy ExamplesPractical Copy Examples To make an enlarged copy of the document To make a reduced copy of the document To reduce paper use To make copies from a book or magazine To copy a postcard Basic Copy Operations Chapter To stop/restart/delete a print job Job can be canceled while it is being printedStopping Printing Stopping Printing To interrupt copying Interrupting a Copy Job Interrupting a Copy Job To make a test copy Making Test Copies Copy 1 Set Basic Copy Operations Chapter To make copies when accounts are specified Making Copies Using AccountsUsing the Copy Track Function Loading Paper Paper Types Paper SpecificationsUse paper that meets the following specifications Paper Sizes Paper SpecificationsNon-standard paper Standard paper Paper feed unit and large capacity cabinet are optional Paper CapacityTypes of paper can be used Paper can be used Loading Paper Chapter Paper output direction Print AreaPaper Storage Automatically Selecting the Paper Source Automatically Selecting the Paper SourceOperating conditions Order for selecting another paper drawer Loading Paper Into the 1st Drawer Loading Paper Loading Paper Chapter Loading Paper Do not load envelopes cross- wise, as shown OHP Touch Paper Setting the Paper Size for the 1st DrawerTo set the paper size To set a non-standard custom paper size To set a paper size in metric measurements To store a non-standard custom paper size To select a stored non-standard custom paper size Pull out the paper drawer Press down on the paper-lifting Loading Paper Into the 2nd Drawer or a Paper Feed Unit To set the Specialty Paper function Specialty Paper function Pull out the paper drawer Loading Paper Into the Large Capacity Cabinet Loading Paper Chapter Loading Paper Into the Manual Bypass Tray Tip Tip CF2002/CF3102 Original 4 Documents Document Types Document FeedingMulti-sheet feeding Plain paper Multi-sheet feeding Thick paper Possible combinations for mixed original paper sizes Mixed Originals Paper Sizes Document Precautions Manual Feeding Document Precautions Multi-Sheet Feeding Multi-Sheet Feeding Feeding the DocumentFeeding the Document Original Documents Chapter Do not press on the lever at the rear of the copier To feed documents of mixed sizes Original Documents Chapter Align the document with the docu- ment scales Manual Feeding Original Documents Chapter Original Documents Chapter Feeding the Document CF2002/CF3102 Specifying 5 Copy Settings To select the Color setting Selecting a Color Setting Automatic Sort/Non-Sort Setting Selection Selecting a Finishing SettingSelecting a Finishing Setting Crisscross Non-Sorting Non-Sort Setting Non-Sorting Non-Sort SettingSorting Sort Setting Crisscross Sorting Sort Setting Hole-Punching Stapling with finisher FN-116 installedStapling with finisher FN-8 installed To specify Finishing settings Selecting a Finishing Setting Automatic Scaling Auto Size Setting Specifying a Zoom SettingSpecifying Full Size ⋅ 1.000 Setting Enlarging Enlarge Settings Custom Sizing CustomZoom Setting Minimizing Minimal SettingVertical and Horizontal Scaling X/Y Zoom Setting To specify a Zoom setting Minimal zoom ratios To recall a stored custom zoom ratio Selecting the Paper Manually Selecting the Paper SettingSelecting the Manual Bypass Tray Bypass Setting Centering Selecting the Paper SettingSmall-Sized Documents To select the Paper setting Auto Paper Source Selection Feature Original Settings Selecting the Orig Copy Settings Original Set- tingsSelecting the Orig Copy Settings Original Settings Using the Book Erase settings Specifying Copy Settings Chapter ? Were the areas of the book not erased correctly? Touch and to specify the length of side X for the document Selecting the Orig Copy Settings Copy Settings Copy Settings Selecting the Orig Copy Settings Copy Settings Example For 8 single-sided document pages Conditions for making booklets To specify a Copy setting Specifying Copy Settings Chapter Specifying Copy Settings Chapter Tip Specifying Thick Documents Thick Original Setting To specify conditions for the original Specifying Copy Settings Chapter Selecting a Photo/Density Setting Selecting a Photo/Density Setting Specifying the Image Type Photo/Density Settings Specifying a Glossy Finish Glossy Mode Setting Enhancing Text Text Enhancement Setting Select this setting for copies with a glossy finish Reducing Moire Effects Screen Pattern Settings To select a Photo/Density setting Specifying Copy Settings Chapter To select a Screen Pattern setting To select a glossy finish Glossy Mode setting To check the settings Checking the SettingsChecking the Settings To change the settings Controlling Jobs Description of Jobs Multi-job featureJob Queuing jobs Controlling Jobs Chapter Print List Screen Job Log Screens Scan List Screen Job Log Screens Job List Screen Print Log Screen Item Name Description Job status Scan Log Screen Scanned Job Screen Job Control Screens Job Control Screens Unlock Job Screen To unlock a job to print a locked document Increase Priority Screen To increase the priority of print a job Combine Jobs Screen 5 6 7 8 To combine jobs Jobs programmed in user boxes can be printed UserBox Screen Touch Job Log, and check the status of the jobs To print a job from a user box Memory Recall Screen Controlling Jobs Chapter To recall a job from the memory Controlling Jobs Chapter Index Index Access key Clear key Copy key Interrupt key KeypadIndex Scan key Start key Stop key Touch panel Double-sided 2in1 copies Double-sided 4in1 copies Index Copy 1 set Copy settings Copy trackDensity setting Background 5-32 10,4-2,4-1026,5-28 Orig Copy Postcard Power switch Turning OFF Turning on Index Photo Image settingPrint area Specialty paper Zoom settings 5-8 Auto size Text & Photo setting 5-32 Text setting5-9 Enlargement Copyright