•Removing Plate jam 3
-Plate jam3 is displayed when the plate is not discharged.
Cover for the plate removal port
Plate removal port
1)Press the 
key. This stops the buzzer and returns the cutter to its
home position.
2)Open the front door and remove the cutter cover.
3)Remove the plate in the transfer section.
4)If the plate is not in the transfer section, remove the processor rack.
5)If the processor rack cannot be removed, cut the visible plate using a cutting bar.
Caution Do not use the cutting bar except to cut and remove jammed plates. After using the cutting bar, store it in the designated location with its cap on.
6)Remove the processor rack and then the plate.
7)With the processor rack removed,
Cutting bar
close the front door and run the processor. Remove the plate discharged from the roller after the processor stops running.
8)
- 72 -
