Mitsubishi Electronics SDP-ECO 1630 III manual Exposure

￿￿￿￿key to call up the

Laser Test Expo.

SDP-Eco1630 III USERS MANUAL

(2) Exposure
1) Press the MENU key to call up Laser Test Expo￿￿￿￿. display￿￿￿￿.	Move the
cursor to the Laser Test Expo. display and press the	key.

2)After Laser Test Expo. display appears, Y N is displayed. Choose

'Y' with the cursor key and press the key. The laser test exposure will start. (Refer to '6-2 Laser menu')

Note

- When the cursor key is at 'N', press the display.

- After completion of the test exposure, press the MENU key once to call up the

<Laser> display and press the MENU key oncemore to return to Start OK .

-When re-adjustment of the light intensity is necessary, change the light intensity value following step (1)-6 in the procedure above.

[Exposure Clear]

The image data which remains in the hard disk drive will be re-exposed if exposure is interrupted during remote exposure (e.g., because of a plate end signal). It is possible for the hard disk to keep up to 2 separations of image data. Image data that has been exposed can be re-exposed.

1. Press the MENU key to call up the < Plate Data > display.

2.Select the < Image Data > key and press the ￿￿￿￿key to move to the display for re-exposure.

3.	Select		in the	Exposure Clear		display.	Pressing the ￿￿￿￿ key
		Exposure
	shows the display for selecting unexposed or exposed data.
4.	Pressing the		key in the				display brings up the
					Unexposure EXEC>
	<Exposed EXEC display.							￿￿￿￿
	Unexposure EXEC............Image data on the hard disk drive, which has not
			yet been exposed.
	Exposed EXEC.................Image data which has already been exposed.
				Select EXEC and press the				key to start
				exposure.

5.Select Exposure Clear

hard disk drive.

and press the ￿￿￿￿key to erase image data on the

Note

- When		Non Exposure Data		is displayed, use the	key (the red reset key)
to return to the previous window. Then press the					MENU key to return to the
	< Plate Data >		window.

-Though the hard disk drive can keep image data for up to 2 separations, you cannot select the separation data to be output.

- 30 -