Mitsubishi Electronics SDP-ECO 1630 III manual Handling processing chemicals

SDP-Eco1630 III USERS MANUAL Chapter 1 On Safety

1.3 Handling processing chemicals

The SDP-Eco 1630 III uses processing chemicals to activate and stabilize exposed plates. The processing chemicals used in this Warning machine are not generally dangerous to humans, but failure to use them in the correct manner is dangerous. Be sure to handle all

processing chemicals with care.

Cautions for use of processing chemicals

Inflammation may occur if processing chemicals come in contact

with the eyes or skin, so be sure to wear protective gear (safety Caution goggles and rubber gloves) when handling the chemicals.

Keep out of reach of children.

What to do in case of emergency

If chemicals come in contact with the eyes, immediately rinse with clean running water for at least 15 minutes. If the inflammation persists, consult an eye specialist.

Caution If chemicals come in contact with the skin, immediately rinse under clean running water.

If chemicals are swallowed, immediately consult a physician. Report the ingredients of the chemical or solution to the physician.

Cautions for handling waste chemicals

These chemicals have high COD and pH levels (especially the activator) and cannot be disposed of by simply pouring them down Caution the drain. Please have processing chemicals removed by a

certified waste management specialist.

- 6 -