
Chapter 7 Maintenance
Screw section
Hole
Hole
Set screw Processor rail (left)
Exit roller (upper) | Rinse water nip roller |
4)Attach the supply pipe to the processing chemical supply hose.
5)Install the processing chemical supply pipe.
Caution | When the processing | |
| chemical supply pipe is | |
| clogged, clean the pipe | |
| regardless of the time | |
| elapsed. |
•Cleaning the nip roller and exit roller
(upper)
Note | Always clean the rinse water |
| |
| nip roller and upper exit roller |
after processing 1000 plates or every month.
1)Loosen the set screw (with a coin) to remove the left processor rail.
2)Pull out the left processor rail toward the operator side.
3)Lift up and remove the rinse water nip roller.
Caution | The rinse water nip roller weighs approximately 2 kilograms, so please |
| be very careful when handling it. |
- 55 -