Chapter 4 Operation
Chapter 4 Operation
The
Be sure to turn OFF the power switch to the host computer (RIP computer) when turning OFF the power switch for this machine.
Never open the front door or plate setting cover unnecessarily. Do not open the plate setting cover except when replacing the plate roll.
Caution Otherwise, the plate being processed may be adversely exposed. If the front door is opened while the plate is being fed, it will adversely affect the plate's image quality and feed state.
Do not open the cover during operation
Do not open the door during operation
4.1 Cable connection check
After checking that the entire system including the host computer (RIP computer) is shut down, check that all cables are connected correctly. The figure below shows cable connections and locations. The cables used here should be SCSI connection dedicated cables.
Wide SCSI 
connector
Do not use cables other than the provided SCSI cables.
If the cable must be extended, please purchase the optional differential unit. This ma- chine is incorporated with an active terminator, so that this differential unit can be mounted internally.
- 25 -
