Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: 
Basic Gateway TCP/IP Wireless USB
5Click Log In to display the SBG940 user configuration and status windows:
Click | To Perform |
Cable Configure and monitor the cable system connection.
Gateway Configure and monitor the gateway preferences (see “Configuring the Gateway”). Wireless Configure and monitor the wireless interface (see “Setting Up Your Wireless LAN”). Firewall Configure and monitor the firewall (see “Setting the Firewall Policy”).
Admin Changing the Default Password.
Info Display information about the SBG940 Setup Program.
Reboot Restart the SBG940. It is the same as pressing the reset button on the Rear Panel for less than five seconds.
Log Out Log out of the SBG940.
If you have difficulty starting the SBG940 Setup Program, see “Troubleshooting” for information.
Router is a configuration option that may appear on your window but may not be supported.
For some settings, after you edit the field and click Apply, you are warned that you must reboot for your change to take effect. Rebooting takes 10 to 15 seconds. After rebooting, you must log in again.
Home Print
X | 26 | SBG940 User Guide |
Exit |
|
|
