Motorola SBG940 manual Setting Up a USB Driver in Windows XP

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

Setting Up a USB Driver in Windows XP

1Insert the SBG940 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be inserted and read by the PC before you connect the SBG940 to the PC.

2Connect the USB cable as shown in USB Connection.

A few seconds after you complete the USB connection, the Found New Hardware Wizard window is displayed:

3Be sure “Install the software automatically” is selected.

4Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is successful, the following window is displayed:

Although your SBG model number may be different than in the images in this guide, the procedure is the same.

5Click Finish to complete the installation. Otherwise, be sure the SBG940 Installation CD-ROM is correctly inserted in the CD-ROM drive.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP”.

Home Print

X	95	SBG940 User Guide
Exit