![](/images/new-backgrounds/1185009/18500953x1.webp)
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Wall Mounting
If you mount the unit on the wall, you must:
•Locate the unit as specified by the local or national codes governing residential or business cable TV and communications services.
•Follow all local standards for installing a network interface unit/network interface device (NIU/NID).
If possible, mount the unit to concrete, masonry, a wooden stud, or other very solid wall material. Use anchors if necessary; for example, if you must mount the unit on drywall.
To mount your SBG940 on the wall:
1Print the Wall Mounting Template on page 23.
Go to page 23 and click the Print icon or choose Print from the File menu to display the Print dialog box. (The following image is from Adobe Acrobat Reader® version 4.0 running on Windows 2000; there may be slight differences in your version.)
Be sure this is not selected.
Select this to print page 23 only.
Be sure you print the template at 100% scale. Be sure Fit to page is not selected.
To print the template only, select Current page as the Print Range.
Click the OK button to print the template.
2Measure the printed template with a ruler to ensure that it is the correct size.
3Use a center punch to mark the center of the holes.
4On the wall, locate the marks for the mounting holes.
Caution!
Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
5Drill the holes to a depth of at least 11/2 inches (3.8 cm).
Home Print
X | 21 | SBG940 User Guide |
Exit |
|
|