Motorola SBG940 manual Choose the WPA Authentication type, Click Save Changes, Wpa-Psk

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

5Choose the WPA Authentication type:

Remote	If a Remote Authentication Dial-In User Service (RADIUS) server is available, you can select this
(Radius)	option and go to step 6. A RADIUS server is typically used in a large corporate location.
Local	If you choose Pre-Shared Key (PSK) local authentication, if the passphrase on any client
(WPA-PSK)	supporting WPA matches the PSK Passphrase set on the SBG940, the client can access the
	SBG940 WLAN. To set the PSK Passphrase, go to step 7. A local key is typically used in a home
	or small office.

6For Remote (Radius) authentication only, set:

Radius Port The port used for remote authentication through a RADIUS server. It can be from 0 to 65535. Radius Key The key for remote authentication. It can be from 0 to 255 ASCII characters.

Radius Server Currently IPv4 only.

Type

Radius Server The RADIUS server IP address in dotted-decimal format (xxx.xxx.xxx.xxx).

7For Local (WPA-PSK)authentication only, set:

PSK	The PSK password containing from 8 to 63 ASCII characters. You must set the identical
Passphrase	passphrase on each WLAN client (see “Configuring a Wireless Client for WPA”).

8Click Save Changes.

If you need to restore the wireless defaults, click Reset Wireless Defaults.

Home Print

X	69	SBG940 User Guide
Exit