If necessary, seat an anchor in each hole

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

6If necessary, seat an anchor in each hole.

Use M5 x 38 mm (#10-16 x 11/2 inch) screws with a flat underside and maximum screw head diameter of 10.5 mm to mount the SBG940.

7Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown:

• There must be .16 inches (4.0 mm) between the wall and the underside of the screw head.

• The maximum distance from the wall to the top of the screw head is 7.6 mm (.3 in).

.3 inches (7.6 mm) maximum

.4 inches (10.5 mm) maximum

.16 inches (4.0 mm)

8Place the SBG940 so the keyholes on the back of the unit are aligned above the mounting screws. Be sure you do not damage the antennas.

9Slide the SBG940 down until it stops against the top of the keyhole opening.

Home Print

X	22	SBG940 User Guide
Exit