Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

Configuring WEP on the SBG940

Use Wired Equivalent Privacy (WEP) only if you have wireless clients that do not support WPA.

Caution!

If you use WEP encryption, you must configure the same WEP key on the SBG940 access point and all wireless clients (stations). Never provide your WEP key or passphrase to anyone who is not authorized to use your WLAN.

To enable WEP and set the key on the SBG940:

1On the SBG940 Setup Program left panel, click Wireless.

2Click the SECURITY tab to display the Wireless > SECURITY — basic page:

3In the Security Mode field, select WEP and click Apply.

4In the WEP Passphrase field, type a passphrase containing from 8 to 31 ASCII characters. For privacy, your passphrase displays as dots.

Home

Print

X

70

SBG940 User Guide

Exit

 

 

Page 76
Image 76
Motorola manual Configuring WEP on the SBG940