Motorola SBG940 manual Configuration Basic Gateway TCP/IP Wireless USB

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

8Click Next. The following window is displayed:

9Select The updated driver... and click Next. If the following window is not displayed, verify that the SBG940 Installation CD-ROM is properly inserted in the CD-ROM drive. If you still cannot find the correct driver file, click Cancel to cancel the installation and perform the procedure for “Removing the USB Driver from Windows 98 or Windows Me”. Then repeat this procedure.

Although your SBG model number may be different than in the images in this guide, the procedure is the same.

10After the window shown under step 9 is displayed, click Next.

If a window with the message Copying Files... displays and asks for the CD-ROM drive, type the CD-ROM drive letter (for example, “D:”) and click OK.

If an Insert Disk window similar to the one below is displayed, Windows 98 system files are needed to complete the installation. To install the files, insert your Windows 98 CD-ROM in the CD-ROM drive and click OK.

Home Print

X	89	SBG940 User Guide
Exit