Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Gateway > PORT FORWARDING — config page fields (continued)
Field | Description |
LAN IP Address | Sets the private LAN IP address for the port forwarding page. An Internet user must know |
| the public IP address to access any port forwarding entry you define on the private LAN. |
Enable | Select this box to enable the port forwarding entries to be accessed through NAT. |
Add | Click to add the virtual server to the PORT FORWARDING list. |
PORT FORWARDING | Displays the configured custom virtual servers. |
Gateway > PORT TRIGGERS — predefined Page
When you run a PC application that accesses the Internet, it communicates with a computer on the Internet. In some applications, especially gaming, the computer on the Internet also communicates with your PC. Because NAT does not normally allow these incoming connections, the SBG940 supports port triggering.
The SBG940 is preconfigured with port triggering for common applications. You can also configure additional port triggers if needed. Configuring port triggers for an application requires:
•
•
The application transport protocol — TCP or UDP
The application port number
You can use the default values for the remaining parameters.
Home |
X | 48 | SBG940 User Guide |
Exit |
|
|
