Motorola SBG940 manual Field Description, NEW Filter Entry, Firewall Policy Template

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

.

Firewall > POLICY — advanced page fields

Field	Description
NEW FILTER ENTRY	Use these fields to set up one or more custom firewall filters, if you have the necessary
	expertise.
Port ID	Type the protocol being filtered.
Enable	Select this box to enable firewall policy filtering for the port.
Allowed Protocol	Select the allowed protocols from the drop-down list.
Port Range (From:To)	Sets the port range, which must contain all ports required by the protocol.
Protocol Number	Sets the protocol number of the IP packets to allow.
Allow Inbound	Enables you to specify the port(s) on which inbound packets can pass through the firewall
	from the Internet to your LAN.
Allow Outbound	Enables you to specify the port(s) on which outbound packets can pass through the
	firewall from your LAN to the Internet. Stateful inspection ensures appropriate responses
	for outbound sessions.
Add	Click to add the new filter. It is displayed on the FIREWALL POLICY table.
FIREWALL POLICY Table	Lists your custom firewall filters.
Enable	Select this box to enable firewall policy filtering for the port.
Delete	Select the Delete box to delete the filter.
Apply	Click to apply your changes.
FIREWALL POLICY
TEMPLATE
Policy Template	You can use this drop-down list to select a predefined policy template on which to base
	your custom template — High, Medium, or Low. These templates are described in “Setting
	the Firewall Policy”
Apply Policy Template	Click to apply the selected Policy Template and cancel any customizations.

Home Print

X	33	SBG940 User Guide
Exit