![](/images/new-backgrounds/1185009/185009169x1.webp)
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Wireless > STATUS Page
You can use this
•
•
View the wireless interface status
Help perform Troubleshooting for wireless network problems
Wireless > STATUS Page Fields
Regulatory Domain | Indicates the country the SBG940 is manufactured for. The list of channels depends on the |
| country’s standards for operation of wireless devices. Depending on the domain set at the factory, |
| USA FCC, Europe, Spain, France, Japan, or some other country name is displayed. |
ESSID | Displays the ESSID set on the Wireless > NETWORK Page. For more information, see |
| “Configuring the Wireless Network Name on the SBG940”. Never provide the ESSID to anyone |
| who is not authorized to use your WLAN. |
Channel | Displays the radio channel for the access point. If you encounter interference, you can set a |
| different channel on the Wireless > NETWORK Page. |
RTS Threshold | Displays the Request to Send Threshold set on the Wireless > NETWORK Page. |
Frag Threshold | Displays the Fragmentation Threshold set on the Wireless > NETWORK Page. |
MAC Address | Displays the SBG940 MAC address. |
Security Mode | Displays the enabled wireless encryption type. For more information, see “Configuring WPA on |
| the SBG940” or “Configuring WEP on the SBG940”. |
MAC Access Control Displays the MAC Access Control setting (see “Configuring a MAC Access Control List on the SBG940”):
•Allow Listed — Only clients in the MAC access control list can access the WLAN.
•Allow Any Station Access — Any wireless client can access the WLAN.
MAC Access Control List Displays the MAC addresses of wireless clients having access (see “Configuring a MAC Access Control List on the SBG940”).
Home Print
X | 79 | SBG940 User Guide |
Exit |
|
|