Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Gateway > LAN — dhcp server config Page
Only experienced network administrators should use this page to perform advanced DHCP server configuration:
CAUTION!
Do not modify these settings unless you are an experienced network administrator with strong knowledge of IP addressing, subnetting, and DHCP.
Gateway > LAN — dhcp server config page fields
Field | Description |
LAN IP Address | You can type the IP address of the SBG940 for your private LAN. The default is |
| 192.168.0.1. |
LAN IP Subnet Mask | Displays the subnet mask in |
Starting IP Address | Enter the starting IP address to be assigned by the SBG940 DHCP server to clients in |
| |
# of DHCP Users | Sets the number of clients for the SBG940 DHCP server to assign a private IP address. |
| There are 253 possible client addresses. The default is 253. |
DHCP Server Lease Time Sets the time in seconds that the SBG940 DHCP server leases an IP address to a client. The default is 3600 seconds (60 minutes).
Domain Name | Sets the domain name for the SBG940 LAN. The default is None. |
Time To Live | Sets the TTL (hop limit) for outbound packets. The default is 64. |
Interface Maximum | Sets the SBG940 LAN MTU in bytes. The minimum is 68 bytes. The default is 1500 bytes. |
Transmission Unit |
|
Apply | Click to apply your changes. You must reboot the SBG940. |
Home Print
X | 44 | SBG940 User Guide |
Exit |
|
|
