Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Setting Up a USB Driver
The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG940. Before connecting a PC to the USB port, perform one of the following procedures based on your Windows version:
•
•
•
•
Setting Up a USB Driver in Windows 98
Setting Up a USB Driver in Windows 2000
Setting Up a USB Driver in Windows Me
Setting Up a USB Driver in Windows XP
The SBG940 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect through Ethernet only.
Caution!
Be sure the SBG940 Installation
If you have a problem setting up the USB driver, remove it by performing one of:
•
•
•
Removing the USB Driver from Windows 98 or Windows Me
Removing the USB Driver from Windows 2000
Removing the USB Driver from Windows XP
Then perform “Running the Motorola USB Driver Removal Utility” on page 104.
Home Print
X | 86 | SBG940 User Guide |
Exit |
|
|
