Motorola SVG2500 manual Rear Panel, Key Description

1 OVERVIEW

Rear Panel

The rear panel contains cabling connectors and the power receptacle.

Key	Item	Description
1	ANT 1	Removable, adjustable antenna. If necessary, contact your Internet
	ANT 2	Service provider about obtaining an optional Motorola wireless high gain
		antenna to increase your wireless LAN performance and coverage.
2	POWER	Use the DC power plug from the SVG2500 DC power supply to connect
		to the AC power outlet.
3	CABLE	Use the cable connector to connect to the coaxial cable outlet.
4	REBOOT EMTA	If you experience a problem, you can push this recessed button to restart
		the SVG2500 (for additional information, see Troubleshooting). To reset all
		values to their defaults, hold down the button for more than five seconds.
		Resetting may take 5 to 30 minutes because the SVG2500 must find and
		lock on the appropriate communications channels.
5	USB	For Windows® only, use the USB port to connect a PC to the SVG2500.
		You cannot connect a Macintosh or UNIX® computer to the SVG2500
		USB port.
6	ETHERNET	Use any Ethernet port to connect an Ethernet LAN cable with RJ-45
	1 2 3 4	connectors to an Ethernet-equipped computer, hub, bridge, switch, or
		Xbox or PlayStation® 2 gaming console.
7	TEL 2	Use to connect a single telephone.
	TEL1/2	Use to connect a single or two-line telephone.

9