Motorola SVG2500 manual Network address, Type, Remote Address

10 SVG2500 VPN PAGES

Field	Description
Remote Endpoint Settings
Address group type	Set the remote VPN access group to one of the following group
	types:
	• Single IP address — for one computer, enter the IP address
	for the specific computer
	• IP address range — for a small range of computers, enter
	the starting and ending IP addresses for the group of
	consecutive IP address that will have access to the VPN
	tunnel.
	• IP Subnet — for an entire subnet/network, enter the Subnet
	and Mask
	For IP address range and IP Subnet, enter the starting and ending
	IP addresses for the group of consecutive IP address that will have
	access to the VPN tunnel.
	The remote VPN endpoint on the other side of the tunnel should
	match the settings here for its local endpoint settings.
Identity type	You can define the remote endpoint identity type to automatically
	use the remote endpoint IP address, or as a user specified IP
	address, fully qualified domain name (FQDN), or e-mail address.
	This is the identity that the far endpoint will use for identification of
	the VPN termination point and handshake.
	The remote VPN endpoint on the other side of the tunnel should
	match the settings here for its local endpoint settings.
Identity	Once the identity type is selected, enter the identity string here.
	• For IP address, enter x.x.x.x.
	• For FQDN, enter yourdomain.com
	• For email address identity, enter yourname@yourdomain.com
	The remote VPN endpoint on the other side of the tunnel should
	match the settings here for its local endpoint settings.
Network address	Select the remote endpoint's WAN address type: IP address or
type	Fully Qualified Domain Name (FQDN)
Remote Address	Enter either the IP address of the remote endpoint or its FQDN.

112