NCR S16 manual Selecting the Type of Installation

Performing a Default Installation

7.When you are prompted by the system, remove the Boot flex #2 from the flex drive now.

The following menu displays:

Select one of the following:

1.Perform Installation

2.Perform System Maintenance

3.Perform System Restore (OA/BASE only)

4.Perform Micro Channel Configuration Type selection number, then press ENTER >.

8.When the menu displays, type 1, and press Enter.

9.Continue with the next section, “Selecting the Type of Installation.”

Selecting the Type of Installation

The following menu displays to let you select the type of installation you want to perform.

NOTE: A new installation of the UNIX System will destroy all files currently on the system.

Select one of the following

1.Interactive Installation

2.Installation using System Defaults

3.Installation using Custom/Clone Defaults

4.Help

5.Cancel Installation

Type selection number, then press ENTER >.

Note: If you select Cancel Installation and then wish to continue, press Ctrl + D to restart the installation selection process.

WARNING: If, in addition to the UNIX operating system, another operating system, such as MS-DOS, is also on the disk, selecting Installation using System Defaults destroys that operating system. Selecting Interactive Installation permits you to install UNIX in a partition and save the other operating system in its own partition.

1.To perform a default installation, type 2 and press Enter.

2.Continue with the next section in this chapter, “Entering the System Name, Date, and Time.”

NCR S16 Minitower Server Installing Network Operating System 11-7