Depending on the version of NCR Server Manager loaded on your server, you may be asked about the type of system you are installing. Answer the questions appropriately for your system and site configuration.
2.Enter your name and company name, and select CONTINUE. You are given the opportunity to change these entries. When the entries are correct, select CONTINUE.
3.Specify this system’s unique name. Type in the name, and select CONTINUE. Do not include any spaces or backward slashes in the system name. You are given the opportunity to change the name. When your entry is correct, select CONTINUE.
4.The installation procedure prepares to configure the network on your system, and copies the required files to the disk.
5.If no network board is found, you are asked whether the installation procedure should automatically detect the Network Interface Card (NIC), or whether you want to install the Microsoft Remote Access Service (MSRAS) on the system. You may be prompted for the full path for the Windows NT installation files. Select the default directory, which will be similar to C:\$WIN_NT$.~ls\. Select CONTINUE to accept the default.
Completing the Pre-loaded Installation
To complete the
1.The installation procedure copies the files for the remainder of the Windows NT Server installation from the temporary installation directory into the Windows NT home directory.
2.Select the domain that the system will join. If this system is to be the Primary Domain Controller of a new domain, you need to select the appropriate button, and complete the name of the domain.
3.If it is to become a Backup Domain Controller, you must select the appropriate button, complete the name of the domain, and the name and password of an administrator on the domain. When you have completed your selections, select OK to continue. Icons and program groups are created for your Windows NT installation.
Installing Microsoft Windows NT Server 4.0 |
