Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or installations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request that the user disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This protection may be particularly important in rural areas.
CAUTION 1: Users should not attempt to make such connections themselves, but should contact the appro- priate electric inspection authority, or electrician, as appropriate.
CAUTION 2: The act of monitoring or recording telephone conversations under certain circumstances may violate federal or state statutes. Consultation with your legal counsel prior to engaging in such practices would be advisable.
NOTICE: The Load Number assigned to each terminal device denotes the percentage of the total load to be connect- ed to a telephone loop which is used by the device, to prevent overloading. The termination on a loop may consist of any combination of devices subject only to the requirement that the total of the load numbers of all the devices does not exceed 100.
8. Safety Certifications
This equipment has been listed by Underwriters Laboratories and found to comply with all the applicable require- ments of the standard for telephone equipment U.L. 1459. This equipment complies with CSA standard C 22.2 No. 225.
8.1Safety Considerations
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
(1)Never install telephone wiring during a lightning storm.
(2)Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
(3)Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
(4)Use caution when installing or modifying telephone lines.
(5)Read and understand all instructions.
(6)Follow all warnings and instructions marked on the product.
(7)Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
(8)Do not use this product near water; for example, under water pipes near a bath tub, sink, or laundry tub, in a wet basement, or near a swimming pool.
(9)Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
REGULATORY INFORMATION |
Page x
Revision 2.0
